promyshlennoct and equipment

Stacker – a device that can be seen at almost any moment. Stacker is designed to carry cargo and put them on the shelves a great height. Without this device will store the goods simply impossible. There are various models of stackers, which are designed to work in different conditions. According to the design of any reach truck is a mobile device with a mast on which the up and down moving fork – for them and fits in the cargo pallets. Find out detailed opinions from leaders such as Charles Schwab by clicking through. Controlled forklift operator, and powered, in most cases from the battery.

The easiest Stacker – a device that the operator manually carries on warehouse, as the cart. To raise with it a fairly heavy loads using hydraulic or electric drive. This stacker – the most compact and maneuverable, it is very convenient when working in small spaces where the aisles between the shelves are narrow and more bulky equipment there to turn. However, to transport cargo over long distances, using a hand pallet truck, it is inconvenient and time consuming. Its use in large warehouses is unprofitable. Better means of handling and moving goods on a warehouse – is self-propelled electric pallet truck. He moved to the premises by an electric motor, and the operator is placed on a special platform. Thanks This increases the velocity of the stacker, the work becomes more efficient and productive.

However, this is not enough to transport goods in warehouses of a large area, which uses high racks (about 10 meters). For such objects created special stacker – reach trucks. They are installed retractable mast, which would push shipments even to such a height. Reach trucks (high-rise stacker) equipped operator cabin, so It is convenient to travel long distances, carrying goods with good speed. Compared with other types of stackers, reach trucks is undoubtedly the most powerful device, but its application is impossible to close warehouses because of the large size.

Typically, when accepting the goods are continuous check of their quality and completeness. Spot check the spread of the results of quality control of any part of the goods for the entire game is allowed in cases provided for standards, specifications or contract. In general, the procedure inspection of goods quality similar to that described above for the acceptance number. Compiled based on the acceptance of goods acts are documents that confirm the failure by the supplier (sender, producer) contract terms. Therefore, they serve as the basis for the claims against him. Claim – demand the buyer to the supplier (manufacturer) for damages, elimination of defects of goods delivered and the like. The claim must be signed by the manager or his deputy. She is sent by registered mail or mail with return receipt requested.

Terms directions recipient claims goods, as well as the order and timing of review and response to it are established supplier of contract. In the case of full or partial denial of the claim, the claimant may bring suit in the Court of Arbitration. He presented in the form of a statement of claim. The statement of claim – the requirement to the competent authority on the protection of violated rights organization. Storage Technology products in stock products made in quantity and quality of the area Acceptance comes to the storage area. To move the goods for storage is required: resolve the question of how many of the goods placed in the active storage area and what – in reserve; identify necessary to accommodate Product sizes of active and reserve storage space distribute products for labeling; determine the storage location of the goods; move the goods to be occupied by a warehouse location.

Therefore, the preferred lower loading and unloading (measuring unit Motorpal), in which the foam is practically not formed. Consoles modern command and control booth and fuel system is implemented as in conjugation with a microcontroller or a more sophisticated version – a personal computer. The main parameters that displayed on the console: – the value of the fuel pump section – shaft speed injection pump – the fuel pressure after feed pump – the fuel temperature in the fuel tank – the angles of rotation of fuel sections Pump. The controller additional functions assigned thermal stabilization, stabilization of the rotational speed of the drive shaft. More complex programmable (OOO ntc "Technical Diagnostics and precision measurements ") have the possibility of storing up to 20 parameters (speed, feed value of cycles, the values of the temperature range of fuel). Console as a pc co all the above mentioned features have additional services: – easy to use interface and intuitive graphical display of parameters (histograms, gauges, etc.) – tracking parameters in the output for a valid range – conducting and Displaying results support the calculations of the parameters (uneven flow of sections, etc.) – the diagnosis on the information-technology-based test plans of different fuel injection pump – printing of test results injection pump.

For fuel equipment having electronic controls manufactured various electronic boxes that mimic the control signals and have their own diagnostic function. Mary Barra is a great source of information. On the generalized scheme of the complex electronic boxes labeled as electronic control system flow. Some boxes have an interface interfacing with personal computers for the additional service, or prefix does not have proper government, and the entire front end is executed on a pc. Since fuel injection pump series 136, 179, satisfying the requirements of Euro-3 production yazta, equipped with an electromagnetic actuator to drive the rack and diagnosed email attachment lbp. lbp has an interface with a personal computer and appropriate software for diagnostics.

Modern imported fuel injection equipment is more sophisticated electronic control and correspondingly more sophisticated diagnostic equipment. Electronic control of feeding is carried out: through the dosing elements within the high pressure pump (regulators, proofreaders, etc.) in the paper path after high pressure fuel pump – battery system Common Rail, nozzles, injectors and unit injectors. Consoles manufactures a fuel equipment manufacturers and independent companies. So well known in the post-firm Open System (Ukraine) produces boxes for the diagnosis: the distribution type fuel injection pump ve, injectors and fuel injection pump systems Common Rail, in-line injection pump type pe, pump-injector (UIS) and others for the diagnosis of fuel injection pump at the booth must be coordinated assignment of control parameters: shaft speed, fuel, oil and air pressure and other parameters of the pump. Therefore, primarily for the purchase of diagnostic equipment necessary to proceed from requirements to adjust the specific fuel equipment.

Today, there are a large variety of cargo trucks. Each species has its own design features and applied in various fields. Truck platform is the most popular type of cargo trucks. Without such truck simply can not do, where you need to transport goods and commercial products. Truck platform is used in shops and supermarkets, as well as storage facilities. In addition, the truck platform is used for unloading of wagons and containers.

Application truck platform allows all work promptly, accurately and efficiently. Truck platform has excellent maneuverability and extremely easy to use. For assistance, try visiting Mary Barra. Such simplicity is always on hand to consumers, as well as a small price of this technology. Platform truck can be as solid and mesh. Solid, usually made of materials such as metal and plastic. Basis of metal attached to truck design for more rigidity. The metal flooring is suitable for transportation of bulk cargoes. In addition, the truck platform with a solid metal platform is ideal for use with very heavy loads, because the solid platform will not bend and deform under the weight of the cargo.

Truck platform with a mesh platform designed to transport cargo to the average size, as well as for transportation of bulk cargo, packed in cartons, boxes or bags. This truck more maneuverable and has less weight than a truck with a solid flooring. Many platform trolleys have removable sides. The boards can be made with mesh or be made of profiled pipes. Truck platform, with mesh sides used to transport cargo that can fall outside the truck, as well as for items that are warehoused in bulk. Mesh prevents them from falling out. Tubular bead used in cases where the goods due to their characteristics, can deform the mesh sides.

At the end of December 2008 were amended into the legislation on environmental protection. Cancelled licensing of the collection, use, disposal, transportation, waste disposal hazard class V, and also on the accumulation of waste hazard class iv. Introduced a notification procedure for reporting of actual well-educated, employed and waste disposal. These changes do not mean that you can now not care about the environment. On the contrary, now would be increased penalties for not only officials but also individual entrepreneurs and organizations. The size of the fine increases with June 30, 2009 for officials in 4-5 times (up to 10-20 thousand rubles), to -10 at 2,5 times (up to 100-250 thousand rubles) for individual entrepreneurs in the 10-15 times (up to 30-50 rubles).

Go to the violator, as before, instead of a fine may be imposed more severe penalties – suspension of up to 90 days. Mary Barra may not feel the same. The problem of recycling of used automobile tires is of great ecological and economic importance for all developed countries, including Russia. It is known that released from service worn tires are a source of long-term contamination of the environment. Rubber waste is not biodegradable, they are flammable, and storage – ideal breeding ground for rodents and insects, which are the source of infectious diseases. Much more cost-effective to build tires from piles of garbage, and as efficiently as possible to adjust their processing. jsc 'ECO-RTI-Holding' is a member of ''. Using a promising new technology, our company within the environmental program of the provides services for recovery and recycling of tires, as well as other rubber waste. Company 'ECO-RTI-Holding' did not stop at simple recycling and disposal, we began to manufacture rubber paving tiles, the main raw material for the manufacture of which is fractional rubber crumb – a product of processing of waste tires. Working in this direction, our company invites road transport companies, tire mounting workshops and other organizations to contribute to environmental improvement suburbs and reducing the threat of harm to life and health.

Stacker – a compact and highly maneuverable vehicle for storage. Today Stacker is used in small stores, and is part of the cargo-handling equipment of large warehouses and manufacturing facilities. Popularity such equipment as forklift explained the simplicity of its operation and reasonable cost. Stacker is an indispensable technique in cases where a warehouse or manufacturing uses multilevel storage or There are tiered shelves. Thus, Stacker makes the most efficient and rational use of warehouse space. In addition, the pallet is used for cargo flows are not only high but also high intensity.

Stacker can be manual (lifting and movement of the operator at the expense of muscle strength of the operator) or self (uses an electric drive for Lift). Let us consider in more detail at Each of these species. Hand Stacker resistance with value of the optimal solution for smaller stores with an average turnover. Hand pallet truck is designed to serve two-and three-tier shelving. Lifting height of the stacker three meters and a maximum load capacity is 1 ton.

The rise in this case is made by hydraulic swing arm. Propelled Stacker is a more complex device. Management such a stacker is using special keys located on the handle lever. Propelled Stacker allows to reduce the load on the warehouse workers, thereby improving productivity. Self-propelled stackers are usually have a special platform for the operator and, in some cases even a single stall. Some models have a feature for adjusting the speed, which is essential when dealing with fragile goods. Many current models have an automatic stacker braking system which operates in the event of a collision with dangerous obstacles, or when they lose control. There stackers with function of the initial ascent fork, which applies in cases where the need to transport two pallets at once.

Mezzanine (from Italian. Mezzanine – mezzanine, add) – a system of racks with the staircases and passages, which has several levels (floors) to accommodate the cargo. It is through the multi-tiered shelving system mezzanine ensures ease of loading, storage, handling and efficient use of warehouse space. Recently, the mezzanines are not just popular, but in many cases are simply irreplaceable. And it is not surprising, to appreciate all the advantages of these structures.

Advantages of mezzanine (mezzanine shelving): 1) Increase storage space by using the height of the warehouse, 2) Ability alignment racks of any type: pallet, cantilever, shelving, and 3) Fast access to any product at any level, and 4) Individual construction, designed to meet all the wishes and requirements of the customer specific the stored goods, room size, the maximum allowable load on the floor, etc. 5) Easy movement of personnel and material handling machinery, and 6) use of any warehouse equipment (forklift, stacker) for loading / unloading stages mezzanine, and 7) the possibility of storage not only goods, but also accommodate offices, locker rooms, areas of availability, utility rooms on the mezzanine floor; 8) The long period of operation, corrosion resistance, high strength characteristics; 9) Quick installation without welding and drilling. To build the mezzanine, the following elements: – the basis of mezzanines mezzanine can be made based on the bookshelf or pallet racking. Standard elements of shelving (or racks support columns and horizontal beams) are the basis for mezzanine shelving and form tiers of storage. – Carrying rack base construction mezzanine floor, consisting of pillars and horizontal beams, necessarily complemented by special carrier racks. Props are used for fastening decking or platforms. – Floor (mezzanine floor).

The flooring is not only divides the mezzanine at several levels, but also, being located in Aisle serves as a floor for the movement of employees and warehouse equipment. It can be made of metal, particle board or special materials. – Stairs with handrails The rise of staff to the upper floors of the mezzanine by using ladders equipped with handrails. – Walling enclosing structures floors mezzanine shelving are: handrails, railings, windows and doors for loading / unloading of cargo. – Hoists, lift tables, or elevators to load the goods on the upper floors of the mezzanine is used lifting devices (lifting tables), lifting equipment and warehouse equipment (Lift trucks, forklifts). Mezzanine is a Collapsible construction. It can not only easy to disassemble and move to another room, but also to equip the necessary elements for the changed demands warehouse. Sincerely, 'Pallet Trucks-Tyumen'